ST RK ISO 9001:2009


ST RK ISO 14001-2006


ST КZ

  • Rus
  • Eng

+7(727) 2647805

+7(727) 2646083

 

Noise Generator ГШ-К-1000 SLOT GR

General Guidelines 
 
Noise generator ГШ-К-1000 SLOT GR is intended for masking the side electromagnetic radiation of personal computers, workstationы of computer networks and complexes at the computer facilities of the first, second and third category by generation and emission of the noise of electromagnetic field (NEMF) within the в broadbands.
 
Technical Specifications: 
 

Working frequency range, MHz

0,1-1000

Quality factor of NEMF

0,8

Bustype

PCI

Consumption current, mA, no more than

350

Error-free running period, h

5000

Service period, years

10

Technical operating life, h

20000

Dimensions
 - generator panel, mm

 

165х125х25

Weight

0,25

 
Delivery set:
  • Generator panel with the radiating antenna ……1 pc.
  • Passport……………………………………………………………1 pc.
 
General guidelines for installation and operation 
After removing the generator from the package make yourself sure by external examination the lack of defects, breakage during ransportation and verify the complete set.
 
Operating procedure
1. Installation of the generator into the computer shall be carried out according to the folowing procedure:
  • Switch the computer off from the 220 V network,
  • Open the computer lid,
  • Insert the generator board into one of free slots on a computer motherboard after preliminary taking  the radiating antenna out through the relevant window on the computer backboard,
  • Close the computer lid,
  • Switch the computer on.
2. Under normal generator operating conditions, the light indicators must be observed. Normal generator operating conditions shall be set up for no ggreater than 10 s. In case of  abnormal situation  (indicator lights faild and the alarm sounding) one should knock off the computer until the reasons for generator operating trouble are discovered.
3. During the generator operation it is recommended to carry out the periodic (ones a week)  functioning test. For this purpose press the button of the generator board that will result in generation failuire. At that, the indicator must go out and the audible alarm must be given simulteneously.
 
 
 

Contact Us

powered by fox contact